PRO FLEECE series
PRO FLEECE
Abrasive fleece 152 × 229 mm – matting, cleaning and scuffing without scratches.
€14.90
incl. VAT, plus shipping · €1.49 / pc
In stock · Delivery 3–5 working days (DE) · free shipping from €49
- No scratches
- For edges and swage lines
- Doesn’t clog
- Wet and dry
The film
Non-woven abrasives on film
No scratches – for edges and swage lines.
Technical details
- Dimensions
- 152 × 229 mm
- Material
- Nylon fleece with abrasive grain
- Use
- dry / wet
- Machine
- Hand sanding
Terms explained
Anything unclear – size, grit, machine? Ask a question about PRO FLEECE
Description
Fleece instead of paper: for scuffing paint on edges and swage lines, matting before painting, cleaning metal and denibbing wood. Three-dimensional – it sands without deep scratches and hardly clogs.
Good to know
Why non-woven?
The abrasive grain sits in an open fibre web rather than on a rigid backing. Non-woven abrasive mattes evenly, leaves no deep scratches and gets into rebates, corners and profiles that a sheet cannot reach.
Sand wet?
Water binds the dust, cools and flushes away the removed material – the scratch pattern gets finer and the abrasive does not clog. Squeegee the surface now and then to check the result.
More in the guide
Helps against
All 6 variants as a table
| Item no. | Type | Quantity | Price | Available |
|---|---|---|---|---|
| PRO-FLEECE-1 | fine (red) | 10 pcs | €14.90€1.49 / pc | yes |
| PRO-FLEECE-2 | fine (red) | 20 pcs | €26.90€1.35 / pc | yes |
| PRO-FLEECE-3 | very fine (grey) | 10 pcs | €14.90€1.49 / pc | yes |
| PRO-FLEECE-4 | very fine (grey) | 20 pcs | €26.90€1.35 / pc | yes |
| PRO-FLEECE-5 | ultra-fine (gold) | 10 pcs | €14.90€1.49 / pc | yes |
| PRO-FLEECE-6 | ultra-fine (gold) | 20 pcs | €26.90€1.35 / pc | yes |
Prices incl. VAT, plus shipping.
When to use it?
In the KORNDEX system:Paint preparation · Key paint & plastic P400–P1000
Complete sanding processes
Example: Car & paint – from the first pass to the finish.
FAQ about PRO FLEECE
Which pack sizes are available?
PRO FLEECE comes in packs of 10 pcs and 20 pcs. The price per piece is shown with every pack.
Do I need a machine for PRO FLEECE?
No, PRO FLEECE is made for hand sanding.
Can PRO FLEECE be used wet?
Yes, PRO FLEECE can be used both dry and wet.
What is PRO FLEECE suitable for?
For Car & paint, Wood, Plastic and Metal.
On shipping, invoices and returns: general shopping questions →
In the guides
Plastic & resin
Sanding plastic: preparing bumpers properly
Bumpers and trim panels smear, warp and reject paint if you treat them like sheet metal. Grit, pressure and the steps that follow.
P180 → P240 → P320 → P400
Read · 1 min
Metal
Keying and painting a radiator
Spot-treat rust with P120, matt down the rest with P240 or abrasive fleece – and why you should keep the machine away from the fins.
P120 → P180 → P240
Read · 1 min
Abrasives
Abrasive fleece or sandpaper?
Fleece mattifies, paper removes. Where fleece does the better job – corners, edges, mouldings, keying before paint – and where it falls short.
Read · 1 min
Product safety
Information under the EU General Product Safety Regulation (GPSR). What that means →
Manufacturer
Custom-Automotive GmbHIndustriestraße 2263517 RodenbachGermanyinfo@customwheel.de- Brand
- KORNDEX
- Product
- PRO FLEECE · Abrasive fleece
- Item numbers
- PRO-FLEECE-1 to PRO-FLEECE-6 (all 6 in the item table)
Warnings and safety information
Dust and eye protection
Sanding creates dust. Work with dust extraction; otherwise wear respiratory protection (at least FFP2) and safety glasses. Dust from wood, metal, paint and plastics can be harmful to health; old paints dating from before the 1990s may contain lead.
Fit and speed
Only fit hook-and-loop abrasives centrally on an undamaged backing pad of the same size and line up the holes. Do not exceed the maximum permitted speed of the machine.
Damaged abrasives
Do not use torn, creased or chipped abrasives – they can come loose while running. Check the hook-and-loop surface of the backing pad regularly as well.
Sparks and heat
Sanding metal produces sparks and hot debris. Do not sand near solvents, paint residues or other flammable materials, and do not leave the contents of the dust bag standing open.
Wet or dry
Only sand wet where the technical data state “Use: wet” or “wet and dry”. Mains-powered machines are not approved for wet sanding unless their manufacturer expressly permits it.