Medium · Shaping and levelling
Sandpaper P150
Intermediate sanding. Wood before fine sanding, feathering filler edges.
Roughly equivalent to 150 Grit (US CAMI standard).
01 · Where it fits
Where P150 sits in the sequence
Before
Pre-sand with P120 – the jump to P150 is no more than double, so the scratches disappear.
Medium range
P100–P180: The standard for rough and intermediate sanding on wood, for feathering filler edges and for keying metal. Removes the scratches left by coarse grits.
After
Carry on with P180 until the surface is as fine as the next job needs.
All grits in the Medium range
In the KORNDEX system:Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240
What P150 is used for
Wood
Intermediate sanding
02 · Buy
Products in P150
We don't stock P150 at the moment – the available grits either side:
03 · Know-how
FAQs about P150
What is P150 sandpaper used for?
Intermediate sanding: Wood before fine sanding, feathering filler edges. Typical for Wood.
Is P150 coarse or fine?
P150 belongs to the medium range (P100 to P180): shaping and levelling. The higher the number, the finer the grit.
Which grit comes after P150?
After P150 comes P180. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.
Should P150 be used wet or dry?
Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P150 from clogging.
Which grit comes before P150?
Before P150, sand with P120 (or finer). Jump straight to P150 from too coarse a grit and you won't get the scratches out.
Not sure P150 is right?
The finder asks about material, machine and goal – and tells you the grit and product.
Start the abrasive finder →